Some items are online only. Please contact us on 0800 600 007 if you wish to collect something in store.
Log in Sign up
Cart (0)
BP893 Micro Earset Omni Condenser Earworn Mic BEIGE

BP893 Micro Earset Omni Condenser Earworn Mic BEIGE

$775.00

Tax included.
With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technica’s BP893-TH MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios.

The BP893-TH MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893-TH over the ear as usual, with no need for clamps on the violin
Outstanding clarity and intelligibility

Outstanding clarity and intelligibility

Lightweight, ergonomic design

Extremely unobtrusive, 1-inch flexible boom

Secure over-the-ear placement

Extended frequency response for natural vocal reproduction

Locking 4-pin microphone output connector compatible with included power module and all Audio-Technica UniPak® body-pack wireless transmitters

UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality

Available in black and beige, wired and wireless models:
BP893 – includes AT8539 power module
BP893-TH – same as BP893, but in beige
BP893c – less power module; 1.4 m cable, unterminated
BP893c-TH – same as BP893c, but in beige
BP893cW – less power module; 1.4 m cable terminated with locking 4-pin connector for A-T UniPak® wireless systems
BP893cW-TH – same as BP893cW, but in beige
BP893cL4 – less power module; 1.4 m cable terminated for Sennheiser wireless systems using Lemo connector
BP893cL4-TH – same as BP893cL4, but in beige
BP893cLM3 – less power module; 1.4 m cable terminated for Sennheiser wireless systems using locking 3.5 mm connector
BP893cLM3-TH – same as BP893cLM3, but in beige
BP893cT4 – less power module; 1.4 m cable terminated with TA4F-type connector for Shure wireless systems
BP893cT4-TH – same as BP893cT4, but in beige
BP893cT5 – less power module;1.4 m cable terminated with TA5F-type connector for Lectrosonics wireless systems
BP893cT5-TH – same as BP893cT5, but in beige

ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Omnidirectional
FREQUENCY RESPONSE 20-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave (wired only)
OPEN CIRCUIT SENSITIVITY –34 dB (19.9 mV) re 1V at 1 Pa
IMPEDANCE 245 ohms (wired only)
MAXIMUM INPUT SOUND LEVEL 114 dB SPL, 1 kHz at 3% T.H.D.
DYNAMIC RANGE (typical) 88 dB, 1 kHz at Max SPL (wired only)
SIGNAL-TO-NOISE RATIO 68 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical (wired only)
SWITCH Flat, roll-off (wired only)
CURRENT CONSUMPTION 0.1 mA typical at 5V (wireless only)
VOLTAGE RANGE 2.5-11V (wireless only)
WEIGHT (MICROPHONE) Microphone, boom & earpiece: 2.0 g
WEIGHT (POWER MODULE) 85 g (wired only)
DIMENSIONS Microphone: 8.1 mm long, 2.6 mm diameter Boom: 26.4 mm long, 1.07 mm diameter
DIMENSIONS (POWER MODULE) 97.6 mm long, 18.9 mm diameter (wired only)
OUTPUT CONNECTOR (POWER MODULE) Integral 3-pin XLRM-type
CABLE 1.4 m long (permanently attached to microphone), 1.6 mm diameter, 2-conductor shielded cable with locking 4-pin connector (wired and cW versions)
ACCESSORIES FURNISHED BP893-TH: AT8539 power module (wired only); AT8440 cable clip; two AT8157-TH windscreens; two AT8156-TH element covers; moisture guard; belt clip (wired only); carrying case
BP893: AT8539 power module (wired only); AT8440 cable clip; two AT8157 windscreens; two AT8156 element covers; moisture guard; belt clip (wired only); carrying case