Open 10am-5:30pm Monday-Friday | 10am-3pm Saturday | 10am-2pm Sunday

Ashly  Power Amp  2 x 150W@ 4 Ohm & 100V  2U

Ashly Power Amp 2 x 150W@ 4 Ohm & 100V 2U

Regular price
$1,890.00
Sale price
$1,890.00
Unit price
per 
Tax included.

These 2 rack space amplifiers utilize our advanced, efficient amplifiers perfect for low impedance, 25V, 70V or 100V installations with modest power requirements. All TRA Series amplifiers are convection-cooled, so there’s little maintenance after the installation, and no annoying fan noise. Of course you get the reliability, superior sonic quality and rugged construction you’ve come to expect from Ashly.

Choose from 4 models available in 2 and 4-channel configurations, with power ratings of 75W and 150W per channel at 4 Ohms, 70V and 100V. All TRA audio controls are on the rear panel. A 6-step LED meter for each channel lets you monitor all levels. TRA amplifiers can drive 4 or 8 Ohm loads and 25V or 70V and 100V constant voltage lines simultaneously. Output transformers are internally mounted.

The 150W models are capable of driving 25V constant voltage lines using the direct coupled 4 Ohm output. TRA Series amplifiers incorporate a switch-mode power supply and Class-D amplifier circuitry, providing an extremely power-efficient solution.

Power Rating Stereo @ 8 Ohms: 80W per Ch.
Stereo @ 4 Ohms: 150W per Ch.
Stereo @ 70V: 150W per Ch.
Stereo @ 100V: 150W per Ch.
Damping Factor >200, 8-Ohm load, <1kHz
Input Sensitivity 1.5V
Input Impedance 20 kOhms, Balanced
Gain Selectable 26dB or 36dB
Frequency Response 20 Hz - 20 kHz, +/-1.0dB
Signal-to-Noise Ratio >105dB, 20Hz - 20kHz unweighted
Total Harmonic Distortion (THD) <0.01% (8-Ohm load, 10dB below rated power, 20Hz - 10kHz
Input Connections 2 x Ch.1,2 3- Pin Euroblock
Output Connectors 2 x Ch.1,2 Screw Terminals
Controls Front Panel 1 x Power Switch
Controls (Rear) 2 x Gain Control Knobs
4 x Delay DIP Switches
2 x 80Hz HPF On/Off Buttons
2 x Gain Sensitivity Buttons
Indicators 1 x Blue Power On LED
1 x Yellow Standby LED
1 x Red Protect LED
2 x Red Clip LED's
6 x Green -24/-18/-12dB Signal LED's
4 x Yellow -6/-3dB Signal LED's
Cooling Convection-cooled
Power Consumption 37.5W (1/8 Power Pink Noise @ 4 Ohm)
Typical Current:
Idle: 0.35A
1/8 Power: 1.10A
Dimensions 483 x 89 x 279.4mm
Weight 8.8 kg
Specialties Adjustable Turn-On delay Switches
Convection Cooling
Switch-Mode Power Supply


Packaging Info

Package Weight 27.0 lb
Box Dimensions (LxWxH) 24.5 x 17.8 x 4.75"