We will be closed Good Friday (29th) and Easter Monday (31st). We are OPEN SATURDAY 30TH MARCH.



BP893 Micro Earset Omni Condenser Earworn Mic BEIGE

Regular price $775.00

Tax included.
With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technica’s BP893-TH MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios.

The BP893-TH MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893-TH over the ear as usual, with no need for clamps on the violin
Outstanding clarity and intelligibility

Outstanding clarity and intelligibility

Lightweight, ergonomic design

Extremely unobtrusive, 1-inch flexible boom

Secure over-the-ear placement

Extended frequency response for natural vocal reproduction

Locking 4-pin microphone output connector compatible with included power module and all Audio-Technica UniPak® body-pack wireless transmitters

UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality

Available in black and beige, wired and wireless models:
BP893 – includes AT8539 power module
BP893-TH – same as BP893, but in beige
BP893c – less power module; 1.4 m cable, unterminated
BP893c-TH – same as BP893c, but in beige
BP893cW – less power module; 1.4 m cable terminated with locking 4-pin connector for A-T UniPak® wireless systems
BP893cW-TH – same as BP893cW, but in beige
BP893cL4 – less power module; 1.4 m cable terminated for Sennheiser wireless systems using Lemo connector
BP893cL4-TH – same as BP893cL4, but in beige
BP893cLM3 – less power module; 1.4 m cable terminated for Sennheiser wireless systems using locking 3.5 mm connector
BP893cLM3-TH – same as BP893cLM3, but in beige
BP893cT4 – less power module; 1.4 m cable terminated with TA4F-type connector for Shure wireless systems
BP893cT4-TH – same as BP893cT4, but in beige
BP893cT5 – less power module;1.4 m cable terminated with TA5F-type connector for Lectrosonics wireless systems
BP893cT5-TH – same as BP893cT5, but in beige

ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Omnidirectional
FREQUENCY RESPONSE 20-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave (wired only)
OPEN CIRCUIT SENSITIVITY –34 dB (19.9 mV) re 1V at 1 Pa
IMPEDANCE 245 ohms (wired only)
MAXIMUM INPUT SOUND LEVEL 114 dB SPL, 1 kHz at 3% T.H.D.
DYNAMIC RANGE (typical) 88 dB, 1 kHz at Max SPL (wired only)
SIGNAL-TO-NOISE RATIO 68 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical (wired only)
SWITCH Flat, roll-off (wired only)
CURRENT CONSUMPTION 0.1 mA typical at 5V (wireless only)
VOLTAGE RANGE 2.5-11V (wireless only)
WEIGHT (MICROPHONE) Microphone, boom & earpiece: 2.0 g
WEIGHT (POWER MODULE) 85 g (wired only)
DIMENSIONS Microphone: 8.1 mm long, 2.6 mm diameter Boom: 26.4 mm long, 1.07 mm diameter
DIMENSIONS (POWER MODULE) 97.6 mm long, 18.9 mm diameter (wired only)
OUTPUT CONNECTOR (POWER MODULE) Integral 3-pin XLRM-type
CABLE 1.4 m long (permanently attached to microphone), 1.6 mm diameter, 2-conductor shielded cable with locking 4-pin connector (wired and cW versions)
ACCESSORIES FURNISHED BP893-TH: AT8539 power module (wired only); AT8440 cable clip; two AT8157-TH windscreens; two AT8156-TH element covers; moisture guard; belt clip (wired only); carrying case
BP893: AT8539 power module (wired only); AT8440 cable clip; two AT8157 windscreens; two AT8156 element covers; moisture guard; belt clip (wired only); carrying case