The transmission energy of the PRO IR-202 transmitter / modulator unit spreads in a wide opening angle in the form of a club in the room. The audio transmission is due to the infrared signal modulation at 2.3 or 2.8 MHz without interference. The combination of the PRO IR-202 with another PRO-IR-202 transmitter increases the range and beam angle of the infrared signals up to 240 °.
A set for ceiling and wall mounting is included. A tripod (item no. A-4986-0) is available as an accessory.
Wide exit angle of the infrared signals
Configuration with 1- and 2-channel transmission
Combinable: A second PRO IR-202 can be connected synchronously to the PRO IR-202 transmitter / modulator unit.
Power supply of the second PRO IR 202 via a connection cable
Operation of the combined configuration even with a single power supply possible
Can be used as fixed (wall / ceiling mounting) or mobile installation (eg tripod)
combined operation
The combination of a second transmitter PRO IR-202 (Secondary Transmitter) with the first PRO IR-202 (Primary Transmitter) is carried out via the supplied mounting kit. All necessary connection cables are included.
The units mounted on top of each other can be rotated freely to the required angles in order to achieve optimum signal supply to the room. Area coverage in combination operation is up to 370 m² for single-channel transmission - ideal for larger rooms.
By selecting the appropriate receiver type ( RCI-102 , PR-22 + or IP-112 ), the range can be additionally influenced - depending on the sensitivity of the receiving diodes.
POWER SUPPLY
master Power supply input: 100-240 V AC, 50-60 Hz
exit 24V DC, 0.8 A (2.5 mm male connector, center contact »Plus«)
connection cable 2 x hollow plug 2.5 mm
carrier frequency 2.3 MHz (channel 1) and 2.8 MHz (channel 2)
Infrared transmission power 0.7W
Ranges / coverage areas A single transmitter: 1-channel operation 180 m²
In combination: 1-channel operation 370 m²
Inputs / outputs for combination operation
primary transmitter Current output 24 V, audio output »sync out«
secondary station Current input 24 V, audio input »sync in«
function displays
LED Input level meters, 1 LED per channel.
additional
Environmental conditions 0 - +50 ° C ambient temperature (non-condensing, non-corrosive environment)
installation types Wall or ceiling mounting: Mounting kit included
Dimensions 254 x 79 x 64 mm (wxdxh) incl. Front panel
colour Black with white lettering, red acrylic stripe
mass 300 g
approvals CE, WEEE, RoHS
A set for ceiling and wall mounting is included. A tripod (item no. A-4986-0) is available as an accessory.
Wide exit angle of the infrared signals
Configuration with 1- and 2-channel transmission
Combinable: A second PRO IR-202 can be connected synchronously to the PRO IR-202 transmitter / modulator unit.
Power supply of the second PRO IR 202 via a connection cable
Operation of the combined configuration even with a single power supply possible
Can be used as fixed (wall / ceiling mounting) or mobile installation (eg tripod)
combined operation
The combination of a second transmitter PRO IR-202 (Secondary Transmitter) with the first PRO IR-202 (Primary Transmitter) is carried out via the supplied mounting kit. All necessary connection cables are included.
The units mounted on top of each other can be rotated freely to the required angles in order to achieve optimum signal supply to the room. Area coverage in combination operation is up to 370 m² for single-channel transmission - ideal for larger rooms.
By selecting the appropriate receiver type ( RCI-102 , PR-22 + or IP-112 ), the range can be additionally influenced - depending on the sensitivity of the receiving diodes.
POWER SUPPLY
master Power supply input: 100-240 V AC, 50-60 Hz
exit 24V DC, 0.8 A (2.5 mm male connector, center contact »Plus«)
connection cable 2 x hollow plug 2.5 mm
carrier frequency 2.3 MHz (channel 1) and 2.8 MHz (channel 2)
Infrared transmission power 0.7W
Ranges / coverage areas A single transmitter: 1-channel operation 180 m²
In combination: 1-channel operation 370 m²
Inputs / outputs for combination operation
primary transmitter Current output 24 V, audio output »sync out«
secondary station Current input 24 V, audio input »sync in«
function displays
LED Input level meters, 1 LED per channel.
additional
Environmental conditions 0 - +50 ° C ambient temperature (non-condensing, non-corrosive environment)
installation types Wall or ceiling mounting: Mounting kit included
Dimensions 254 x 79 x 64 mm (wxdxh) incl. Front panel
colour Black with white lettering, red acrylic stripe
mass 300 g
approvals CE, WEEE, RoHS